Model

Process to build a house:

1. Tell us your special requirement by send us the architectural drawings

2. We help design the structure

3. Our software which is imported from Australia instructs the production system to do the details

4. Advance equipments insure the quality of products

5. Pre-assemble the structure members in our workshop if you need this

6. Bundle up all members

7. Assemble the structure on site and you can help from our engineers with the installation

A. erect the wall

B. assemble the floor and truss

C. install the cladding materials

D. interior deccration

Specification:


Roof

* 5:12 Roof slope; Roof truss at 24” (609 mm) O.C. connected to wall tracks

* R30 Fiberglass insulation in the roof truss cavity

* 1/2”(12mm) OSB board on top of the truss chord

* Waterproof attached to OSB board

* Asphalt shingles roofing (Standard)

* 1/2”(12mm)Gypsum board for inside ceiling


Exterior Wall

* 3.5” (89 mm) Wall studs spaced at 16” (406 mm) or 24” (609 mm) O.C. anchored to the foundation

* R13 Fiberglass Insulation in the wall stud cavity

* 1/2” (12 mm) OSB Board Covered On the Outside of the Stud Flange

* Breathing paper

* 5/16” (8mm) cement Siding on the Outside surface of the Exterior Wall

* Paint on the siding

* 1/2” (12mm) Gypsum Board on the Inside Surface

* Normal Type Exterior Door/Garage

* Door/Window, Vinyl frame & double glass for all exterior doors and windows